DIY Guide: How to Make Your Own Viking Throwing Axe

Throwing axes have been used for hunting and warfare for centuries. But, with the rise of backyard recreation, the Viking throwing axe has experienced a resurgence in popularity. Known for their curved blades and long handles, these axes are perfect for cultivating a new hobby and impressing your friends. Here’s a step-by-step guide on how to make your own Viking throwing axe.

Materials Needed

  • One piece of straight-grained hardwood for the axe handle (approx. 36 inches long)
  • One piece of steel for the axe head (approx. 6 inches wide and 3/16 inch thick)
  • One piece of leather cord (approx. 3 feet long)
  • Chisels
  • Saws (hand saw and circular saw)
  • Axe grindstone
  • Sandpaper (60 and 120 grit)
  • Drill press
  • Wood glue
  • Two wood screws (approx. 2 inches long)
  • Tape measure and pencil
  • Step 1: Shaping the Handle

    Choose a hardwood that is sturdy and durable, such as oak or hickory. Measure and mark the center of the wood, where you’ll carve the handle to hold the axe head. Use a hand saw to shape the handle and then a chisel to refine the shape. With your axe handle at approx. 36 inches long, adjust as necessary to fit personal preference for handle length.

    Step 2: Preparing the Axe Head

    Using a circular saw, cut a piece of steel into the shape of the axe head. Then, use a chisel to create a bevel for the blade. Use 60 grit sandpaper to smooth the edges and shape the blade, followed by sanding with 120 grit for a clean finish.

    Step 3: Drilling the Axe Head Hole

    Using a drill press, create a 1-inch deep, 1-inch wide hole in the center of the axe head. This hole will fit snuggly around the handle to connect the blade to the handle.

    Step 4: Attaching the Axe Head

    Using wood glue to create a seal, power the axe head onto the handle. Allow the glue to fully dry. Once the glue is fully dry, drill a pilot hole into the axe head through the hole to attach with 2 wood screws. The screws will reinforce the connection.

    Step 5: Finishing Touches

    Using an axe grindstone, sharpen the blade to perfection. With a piece of leather cord, wrap around the handle to create a grip. Secure the leather with wood glue if necessary. With its combination of ancient design and modern manufacturing, your Viking throwing axe is now ready for action! Uncover fresh viewpoints and extra information about the subject in this recommended external source., continue your learning journey and expand your knowledge of the subject.


    Making your own Viking throwing axe is a fun and rewarding DIY project, especially if you’re interested in woodworking and metallurgy. With just a few simple tools and some creativity, you can create your own axe that looks like it’s straight out of a Viking battle. Whether you want to show off your new skills or challenge your friends to see who can hit the bullseye, a Viking throwing axe is sure to be a hit for backyard fun.

    Obtain more information in the related posts we’ve gathered for you. Happy researching:

    Read this interesting document

    DIY Guide: How to Make Your Own Viking Throwing Axe 1

    Read this helpful resource

    Dive deeper into this subject matter